Automatic cutting thickness regulating unit ISP-07NT intended to be mounted in a horizontal belt sawmill.

 

Selbit - ISP07NT

  

Available functions:

- the saw kerf taken into account when setting the dimension

- cut in normal mode, board after board

- cut in normal mode without removing the boards after cutting

- setting the cutting program depending on the level of the track, using the “item by item up” method

- protection in case of a damage of the traffic system

- automatic adjustment to the drive type of the machine

- operating temperature -20* to 50* C 

 

User manual ISP-07NT

 

 

Automatic cutting thickness regulating unit ISP-09 intended to be mounted in a horizontal belt sawmill.

 

Selbit - ISP09

  

Available functions:

- the saw kerf taken into account when setting the dimension

- cut in normal mode, board after board

- cut in normal mode without removing the boards after cutting

- setting the cutting program depending on the level of the track, using the “item by item up” method

- quick measuring of the cut material by the “up to the saw height” method

- arranging one cutting program stored in the memory of the regulating unit

- protection in case of a damage of the traffic system

- automatic adjustment to the drive type of the machine

- operating temperature -20* to 50* C

 

 

 

 

Automatic cutting thickness regulating unit ISP-010 intended to be mounted in a horizontal belt sawmill.

 

Selbit - ISP010

  

Available functions:

- the saw kerf taken into account when setting the dimension

- cut in normal mode, board after board

- cut in normal mode without removing the boards after cutting

- setting the cutting program depending on the level of the track, using the “item by item up” method

- quick measuring of the cut material by the “up to the saw height” method

- setting three independent cutting programs stored in the memory of the regulating unit

- rapid dimension keys

- raising the saw into the return position by the thickness of the current cut

- protection in case of a damage of the traffic system

- automatic adjustment to the drive type of the machine

- operating temperature -20* to 50* C

 

 

User manual ISP-010

 

 

Automatic cutting thickness regulating unit ANP-05 is designed for installation in machines such as bilateral disc or belt trimming machines, or other machines requiring manual or automatic setting of spacing of the vertically working saws.

 

Selbit - ANP05

  

Available functions:

- manual control of saw blades available from the keyboard of the regulating unit

- automatic setting of saws

- rapid dimension keys

- protection in case of a damage of the traffic system

- automatic adjustment to the drive type of the machine

- operating temperature -20* to 50* C

 

User manual ANP-05

 

 

Automatic cutting thickness regulating unit ANTD-02 is designed to be mounted in the 2-saw sawmill.

 

Selbit - ANTD02

  

Available functions:

- the saw kerf taken into account when setting the dimension

- automatic setting of 2 saws to the cut size

- automatic lifting the saw at the return run

- the possibility of using the reference point for the return of one of the saws

- protection in case of a damage of the traffic system

- automatic adjustment to the drive type of the machine

- menu in Polish and English

- operating temperature -10* to 40* C

 

 

 

Automatic cutting thickness regulating unit ANT-2G is designed to be installed in a horizontal 2-head belt sawmill.

 

Selbit - ANT2G

  

Available functions:

- the saw kerf taken into account when setting the dimension

- automatic setting of 2 saws to the cut size

- automatic lifting the saw at the return run

- setting the cutting program depending on the level of the track, using the “item by item up” method

- quick measuring of the cut material by the “up to the saw height” method

- arranging an independent cutting program stored in the memory of the regulating unit

- the ability to lock the upper saw (one-saw operation)

- protection in case of a damage of the traffic system

- automatic adjustment to the drive type of the machine

- menu in Polish and English

- operating temperature -10* to 40* C

 

 

User manual ANT-2G

 

 

A microprocessor cycle counter MLC-02/03N is designed to be installed in blade or disc saw grinder. It is used to automatically switch off the machine after the performance of a pre-programmed number of grinding cycles.

 

Selbit - MLC02/03

  

Available functions:

- the possibility of setting from 1 to 9 grinding cycles

- the possibility of setting from 1 to 999 teeth of the ground saw

- available for the ordinary grinders and CBN

- memory of the interrupted grinding cycle

- protection in case of a damage of the traffic system

- operating temperature -10* to 40* C

 

User manual MLC03

 

 

An electronic thickness gauge RLI-04 is designed to be installed in a belt sawmill, or other machine, where the reading of the machining tool shift is required.

 

Selbit - RLI04

  

Available functions: 

- manual setting the dimension with signaling the return run to the position

- the saw kerf taken into account when making the measurement

- instantaneous dimensioning excluding the saw kerf

- operating temperature -20* to 50* C

 

 

 

Rotary encoder from the POI –XXz series

 

Selbit - POIxx

  

Encoders designed to work with a series of regulating units for machines with a screw drive.

 

 

Linear encoder working with magnetic tape MB-3200

 

Selbit - MSK320

  

In the case of a machine with a head actuated by a chain, use linear encoder type MSK-320 working with magnetic tape MB-3200. Magnetic measuring tape consists of two parts equipped with a self-adhesive layer.

 

User manual MSK320